Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Futagami, Satoshi; Ando, Masanori; Yamano, Hidemasa
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 10 Pages, 2024/03
Yamano, Hidemasa; Futagami, Satoshi; Ando, Masanori; Kurisaka, Kenichi
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 11 Pages, 2024/03
In this study, the dynamic structural analysis of the reactor vessel for excessive earthquake using the FINAS/STAR code has shown the elephant foot buckling deformation and calculated the cumulative fatigue failure fraction. Using the calculation results, this paper describes the fragility curve using the safety factor method, indicating the significantly improved curve compared the previous one.
Kang, Z.; Okuda, Yukihiko; Nishida, Akemi; Tsubota, Haruji; Li, Y.
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 10 Pages, 2024/03
Most studies conducted till now on local damage of reinforced concrete (RC) slab structures subjected to projectile impact are about normal impact, while few research related to oblique impact can be found. The objective of this study is to carry out impact tests under different impact conditions including oblique impacts, to confirm the different impact behaviors of the RC slab structure, to develop an analysis method by investigating the test results and analytical conditions, and to validate the analysis method through comparison with the test results. This study focuses on the scabbing damage which is one of the local damage modes of RC slab. Based on oblique impact test results due to soft projectile with hemispherical nose shape, we investigate the relationship between the criterion related to the concrete fracture and the occurrence of scabbing damage.
Takito, Kiyotaka; Okuda, Yukihiko; Nakamura, Izumi*; Furuya, Osamu*
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 10 Pages, 2024/03
no abstracts in English
Okuda, Yukihiko; Kang, Z.; Nishida, Akemi; Tsubota, Haruji; Li, Y.
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 10 Pages, 2024/03
The outer walls of nuclear facility buildings consist of reinforced concrete (RC) panels. When a projectile collides with a nuclear facility building, local damages such as penetration, scabbing, and perforation can occur in the RC panels. Numerical simulation using finite element analysis (FEA) is generally employed to assess these damage conditions. However, the impact analysis by FEA modelled with continuum elements is difficult to address phenomena such as scattering fragments of concrete because the elements deletion method for large deformation is used to prevent interruption of numerical calculations. Recently, a numerical method known as Smooth Particles Hydrodynamics (SPH), one of the particle methods, has been employed to address discontinuous phenomena. In this paper, we focus on the scabbing damages to RC panels and report on the findings obtained through the validation of the numerical analysis using the SPH method.
Yamakawa, Koki*; Moritani, Hiroshi*; Saruta, Masaaki*; Iiba, Masanori*; Nishida, Akemi; Kawata, Manabu; Iigaki, Kazuhiko
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 10 Pages, 2024/03
no abstracts in English
Nishida, Akemi; Kawata, Manabu; Choi, B.; Kunitomo, Takahiro; Shiomi, Tadahiko; Iigaki, Kazuhiko; Yamakawa, Koki*
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 10 Pages, 2024/03
no abstracts in English
Choi, B.; Nishida, Akemi; Shiomi, Tadahiko; Kawata, Manabu; Iigaki, Kazuhiko; Yamakawa, Koki*
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 8 Pages, 2024/03
no abstracts in English
Ito, Sho*; Ota, Akira*; Sonobe, Hideaki*; Ino, Susumu*; Choi, B.; Nishida, Akemi; Shiomi, Tadahiko
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 10 Pages, 2024/03
no abstracts in English
Yoshimura, Kazuo; Doda, Norihiro; Igawa, Kenichi*; Uwaba, Tomoyuki; Tanaka, Masaaki; Nemoto, Toshiyuki*
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 8 Pages, 2024/03
To investigate possibility of the insertion of the reactivity by the deflection of the upper core support plate, structural mechanics analyses of the domain consisting of the fuel assemblies and core support plates and evaluation of the reactivity due to the inclination of the fuel assemblies in EBR-II were carried out. As a result, it was indicated that the upper core support plate deflected downward larger at the low flowrate condition than that at the high flowrate condition and positive reactivity was inserted due to the inclination of the fuel assemblies at the low flowrate condition.
Murakami, Kenta*; Arai, Taku*; Yamada, Koji*; Momma, Kensuke*; Tsuji, Takashi*; Nakagawa, Nobuyuki*; Onizawa, Kunio
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 3 Pages, 2024/03
This paper studied the future vision of codes and standards in Japan by systematically comparing Japanese regulatory rules, standards, and industry guides related to long term operation with international safety standards, and confirmed that the Japanese standard system generally meets their recommendations. The recommendation for the future improvements of Japanese codes and standards were summarized into five items.
Matsukawa, Keisuke*; Satoda, Akira*; Nishida, Akemi; Guo, Z. H.*
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 10 Pages, 2024/03
no abstracts in English
Yamaguchi, Yoshihito; Mano, Akihiro; Li, Y.
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 10 Pages, 2024/03
The steam generator (SG) is an important component of a pressurized water reactor. In addition, local wall-thinning has been reported in SG tubes. The burst differential pressure, considering both the internal and external pressures from the primary and secondary coolant systems, should be predicted for the failure probability evaluation or structural integrity assessment of SG tubes. In this study, based on the results of burst tests performed in Japan and the United States, we improved the existing burst pressure estimation method for SG tubes with wall-thinning. In addition, as an example of the utilization of the improved burst pressure estimation method, the conditional failure probabilities for SG tubes with local wall-thinning, which is necessary for probabilistic risk assessment and risk-informed decision making, are calculated considering the dimensions of the wall-thinning.
Choi, B.; Nishida, Akemi; Takito, Kiyotaka; Tsutsumi, Hideaki*; Takada, Tsuyoshi
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 10 Pages, 2024/03
no abstracts in English
Muramatsu, Ken; Kubo, Kotaro; Choi, B.; Nishida, Akemi; Takada, Tsuyoshi
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 10 Pages, 2024/03
no abstracts in English
Ha, Yoosung; Shimodaira, Masaki; Katsuyama, Jinya
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 7 Pages, 2024/03
Heat-affected zone (HAZ) produced by butt-welding in reactor pressure vessel (RPV) steel is one of the representative materials for surveillance program. The fracture toughness values of HAZ may show a large uncertainty due to inhomogeneous metallurgical structures. Also, the inhomogeneous microstructure in HAZ may influence on the degree of uncertainty in the fracture toughness and the sensitivity to irradiation embrittlement. We investigated the fracture toughness in HAZ of unirradiated material with respect to its distance from the fusion line of welds, where the amount of mixed microstructures change due to the thermal history during the welding. Mini-C(T) specimens of HAZ were harvested from the crack position at 0.5 mm, 1 mm and 2 mm from the fusion line of welds. The uncertainty of fracture toughness in HAZ, from the fusion line at 0.5 mm in particular, was larger than those of base metal at a quarter thickness. From the results of fracture toughness evaluation considering the standard deviation, there was the difference of reference temperature, 
in each position of HAZ. in all positions of HAZ was significantly lower than that of base metal, which means the fracture toughness in HAZ was greater than that of base metal at a quarter thickness.
Nagoshi, Yasuto*; Fukahori, Takuya*; Okada, Hiroshi*; Takahashi, Akiyuki*; Shimodaira, Masaki; Ueda, Takashi*; Ogawa, Takuya*; Yashirodai, Kenji*; Takahashi, Yukio*; Ohata, Mitsuru*
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 9 Pages, 2024/03
no abstracts in English
Kasahara, Naoto*; Yamano, Hidemasa; Nakamura, Izumi*; Demachi, Kazuyuki*; Sato, Takuya*; Ichimiya, Masakazu*
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 8 Pages, 2024/03
In this study, we propose failure mitigation methods by application of passive safety structures. The idea of the passive safety structures was applied to next generation fast reactors under high temperature conditions and excessive earthquake conditions.